U
June 24th-5th. Glaze, slip, load on the 24th....fire off on Sunday the 25th.Host Kiln Firing Schedlues:
Gustin Ceramics: 
Loading - May 20 - May 25
Firing - June 20 - June 26
Unload - Saturday, July 15th
Those who participate from the conference can help with both the loading and firing, but it’s not mandatory.
People can drop work from May 15-May 20th. I’ll be sending detailed shift schedules for those in the conference
who are signed up for my kiln.

Canton Clay Works:
Loading Firing, and Unloading schedule:
Wed June 21 loading 10:00a.m.-3:00p.m.
Thurs June 22 loading 10:00a.m.-3:00p.m
Fri June 23 Build door, lower lid, ect 9:00a.m.-1:00p.m.                                                   
Fri June 23- Sunday June 25 Firing
Sunday July 2 10:00a.m. Unloading this timing is flexible.

Ben Eberle:
June 24th-5th.
Glaze, slip, load on the 24th....fire off on Sunday the 25th.
​Unload Wednesday June 28 at noon.
Alison Palmer Studios:
June 21st glaze and wad
June 22nd. glaze,wad and start loading
June 23rd. load and brick up the door
June 24th evening~ start the pre-heat
June 25th fire all day and into the evening
June 29th Unload

Trevor Youngberg:
Firing Schedule: 
June 21 10am-6pm Glaze/Wad/Load/Fire           
June 22   Slow Rise to Orange Heat                       
June 23 Reach and Hold @ high temps                 
June 24 6pm Finale' 
June 30 Unload

Mike Roche:
June 22- 10 am- Glaze and begin to load in the afternoon. Finish by 4pm
June 23- 10 am- Wad and load- Start fining by 7 pm
June 24-Fire all day/night
June 25th Fire until 3-4 pm
June 30th 10 am Unload kiln

Jody Johnstone:
June 21 load. My glazes will be available for participants to use.
June 22 load and brick up door
June 23 4:00 am start preheat
June 24 firing all day
June 25 soak and fire down, done around 5:00.
June 28 unload
This leaves June 29 to drive down to CT for the weekend activities.

Dirt Floor Studios:
Load Friday and Saturday the June 23 and 24     
Fire the 25 into 26th                                           
Unload on the 29th

New Hampshire Potters Guild:
June 23 wadding, load kiln, start pre-heat early evening
June 24 fire all day and night
June 25 fire into the afternoon
June 28 unload
Arrangements can be made to pick up finished pots in Connecticut if participants do not attend
the unloading.